TP-Link TL-WR902AC User Manual page 164

Chapter 8
• Connect manually
immediately. This mode also supports the
on demand mode. The internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
Note: Sometimes the connection cannot be terminated although you have specified the
applications are visiting the Internet continually in the background.
L2TP
If your ISP provides L2TP connection, please select L2TP.
• Username/Password
fields are case-sensitive.
• Confirm Password
password you entered is correct.
• Connect/Disconnect
• Addressing Type - Select either as required by your ISP. If
enter the IP address, subnet marsk, gateway and DNS also provided by your ISP.
• Internet IP Address/ Internet DNS
assigned by L2TP server.
• MTU(Bytes) - The default MTU size is 1480 bytes. It is not recommended that you
change the default MTU size unless required by your ISP.
- You can click
- Enter the username and password provided by your ISP. These
- Enter the Password provided by your ISP again to ensure the
- Click this button to connect or disconnect immediately.
- The internet IP address and DNS server address
Configure the Router in Hotspot Router Mode
Connect/Disconnect
Max Idle Time
Static IP
to connect/disconnect
function as Connect
Max Idle Time because some
is selected, please
157