TP-Link TL-WR902AC User Manual page 127

Chapter 6
1. Insert your USB storage device into the router's USB port directly or using a USB
cable. Wait several seconds until the USB LED becomes solid on.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
3. Go to USB Settings
4. Click Enable to enable the FTP Server.
5. Click Enable to enable the internet access to the FTP server.
6. Specify a port number for the
7. Click Apply.
¾ To specify a folder to be accessed via the FTP server:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to USB Settings
3. Click Add New Folder.
4. Specify a name for the folder to be shared in the
folder you want to share. And determine the access right of user accounts.
5. Click Apply.
6. You can check which folder is shared and also edit or delete the folder.
¾ To access the USB disk locally:
1. Connect Your USB Disk
Insert your USB storage device into the router's USB port directly or using a USB cable.
Wait several seconds until the USB LED becomes solid on.
> FTP Server.
Service Port. The default value is 21.
> FTP Server.
Configure the Router in Range Extender Mode
Share Name field. And select the
120