Client Mode - TP-Link TL-WR902AC User Manual

Chapter 3
4. Select the LAN IP type of the router or leave the default settings
cases, and then click Next.
5. Click Finish to apply the settings.
6. Relocate the router about
zone. The extended network
network, but may have different wireless network name if you have customized it
during the configuration.
3. 2. 4.

Client Mode

1. Select Client for the operation mode of the router.
2. Click Connect to connect to the host network in the
Set Up Internet Connection Via Quick Setup Wizard
halfway between your host netowork and the Wi-Fi dead
shares the same Wi-Fi password
Smart IP
as that of your host
AP List page.
for most
14