Advanced Routing; Static Routing List - TP-Link TL-WR902AC User Manual

Chapter 4
Done!

4. 11. Advanced Routing

Static Routing is a form of routing that is configured manually by a network administrator
or a user by adding entries into a routing table. The manually-configured routing
information guides the router in forwarding data packets to the specific destination.

4. 11. 1. Static Routing List

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced Routing
¾ To add static routing entries:
1. Click Add New.
2. Enter the following
• Destination IP Address
network or host that you want to assign to a static route.
• Subnet Mask
the network portion, and which portion is the host portion.
• Gateway - This is the IP address of the default gateway device that allows the
contact between the router and the network or host.
Now only the specific host(s) can visit the target(s) within the
scheduled time period.
> Static Routing.
information.
- The Destination IP Address is the address of the
- The Subnet Mask determines which portion of an IP address is
Configure the Router in Wireless Router Mode
63