TP-Link TL-WR902AC User Manual page 35

Chapter 4
• Location - Please select the location where you are enjoying the 3G/4G service.
• Mobile ISP - Please select the ISP providing the 3G/4G service. The router will
automatically fill in the default Dial Number and APN of that ISP.
• Username/Password
• Authentication Type
select Auto or consult your ISP.
• Auto - The router will have dynamic negotiation with the dialing server and the
authentication type doesn't need to be specified.
• PAP - Password Authentication Protocol. Select
• CHAP - Challenge Handshake Authentication Protocol. Select
by your ISP.
Click Advance to set advanced options.
• MTU size (in bytes)
network is 1480 Bytes.
• Echo request interval
which the router requests Access Concentrator to echo at every interval. The default
value is 30. 0 means no detection.
- Enter the username and password provided by your ISP if any.
- Some ISPs require authentication to access the internet. Please
- The typical MTU (Maximum Transmission Unit) size for 3G or 4G
- Enter a time interval value between 0 and 120 (in seconds) for
Configure the Router in Wireless Router Mode
PAS if required by your ISP.
CHAP if required
28