Chapter 5
How
can I do
that?
Done!
5. 4. 5.
Wireless Advanced
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Wireless 2.4GHz/5GHz
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to
Wireless 2.4GHz/5GHz
3. Click
Enable
to enable the Wireless MAC Filtering function.
4. Select
Allow the stations specified by any enabled entries in
the list to access
5. Delete all or disable all entries if there are any entries already.
6. Click
Add New
and fill in the blank.
1 ) Enter the MAC address 00:0A:EB:B0:00:0B/00:0A:EB:00:
07:5F in the MAC Address field.
2 ) Enter wireless client A/B in the Description field.
3 ) Select
Enabled
4 ) Click
Save
and click Back.
7. The configured filtering rules should be listed as the picture
shows below.
Now only client A and client B can access your network.
>
Wireless
Advanced.
Configure the Router in Access Point Mode
>
Wireless MAC
as the filtering rule.
in the Status drop-down list.
Filtering.
88