TP-Link TL-WR902AC User Manual page 92

Chapter 5
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method TWO: Enter the Client's PIN
1. Keep the WPS Status as
2. Select Enter the new device's
filed and click Connect.
3. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method Three: Enter the Router's PIN
1. Keep the WPS Status as
2. Enter the router's current PIN on your client device to join the router's Wi-Fi network.
Enabled and click Add
PIN, enter your client device's current PIN in the
Enabled and get the
Configure the Router in Access Point Mode
Device.
Current PIN of the router.
PIN
85