Table of Contents
Advertisement
OPERATION
3.1
Overview
This section explains how to use the projector once it has been installed. Please read through these
pages before using the projector for the first time. An understanding of projector features and how
to access them will help you to take full advantage of the capabilities of the projector within min-
utes.
NOTE: Installation involves locating the projector and adjusting it for use at that location. If you
have not yet installed the projector, refer to Section 2, Installation and Setup.
3.2
Projector Basics
Most projector functions and adjustments are entered through keypad commands that either con-
trol the projector directly or activate a system of intuitive menus. Variations in settings can be
defined and retained in the projector's internal memory as a custom Memory Bank, with up to 99
different Memory Banks possible.
Lamp access
inside
Adjustable
feet (4)
Vertical
offset
Front IR Sensor
Focus
Horizontal
offset
ring
Filter side panel
Input panel handle (2)
3-1
LCD status
window
Rear
IR sensor
AC
Input panel
Video input
Hard reset
RGB input
Serial ports
Audio input
Wired kypd. port
Status LEDs
Advertisement
Table of Contents
