Table of Contents
Advertisement
OSD (On-screen display)
OSD*
Press and hold
ible). Or press
tion (useful if you are unsure of the present status). Note that invisible menus are fully function-
al.
NOTES: 1) With OSD on, you can still mute menus, error messages, slidebars, etc. with the
appropriate setting in the OSD Settings menu. 2) The status of the
LCD window on the rear panel of the projector.
Help
Help
Press
for detailed information about any current menu and highlight. Press
Help
exit. Press
Help
(Input) Selection and Stat/Pwr LEDs. Press
Test
Test
Press
to display one of the available test patterns. Press
Test
able pattern in the sequence.
the current test pattern from the screen and return to the current external source.
NOTE: For a complete list of all test patterns, see the Advanced menu description later in Section
3.
Keypad operating settings (protocols)
The remote keypad and the optional wired keypad both store keypad operating settings (called
protocols) in memory. In some advanced applications, such as when you want to use two sepa-
rate keypads to control two projectors independently, you may want to override the original pro-
tocol set at manufacture (which is "A or B") for one of the keypads. See section 2.12, Keypad
Protocols and Conversion for complete instructions.
for approximately 1 second to toggle menus on or off (i.e., visible or invis-
OSD*
followed immediately by
OSD*
to access the General Help menu consisting of Using Help, Setup, Keys, Source
will exit after the last pattern, or press
Test
or
to guarantee the correct toggle direc-
ON
OFF
to leave General Help.
Exit
3-8
OPERATION
key is displayed in the
OSD*
again to display the next avail-
Test
at any time to remove
Exit
again to
Help
Advertisement
Table of Contents
