Runco Video Xtreme VX-4c Owner's Operating Manual page 31

OPERATION
Menu
Menu
Press
Menu
access to specific functions, such as Memory Banks or Image Adjustments. Press
remove all menus and return to the displayed source.
Enter
Enter
Press
Enter
a parameter adjustment and return to the previous menu or image.
Exit
Exit
Press
Exit
NOTE:
bars) or within pull-down lists. It acts as a "cancel" in these cases.
Arrow Keys
The arrow keys have a variety of functions depending on the situation. Some typical uses are
described below. See also Editing Text later in Section 3.
ON Use the
decrease the value in the second (bottom) slidebar of a double slidebar.
Or
OFF
You can also use
asterisk symbol-to ensure a toggle only in the desired direction. When turning the projector on,
for instance, you may be too far from the projector to know whether it is really off or if the shut-
ter is merely closed. If you press
the projector on, the projector will actually turn off if the projector was already on. Instead, to
avoid the risk of toggling in the wrong direction, quickly press and release normally the function
key you wish to toggle (in this case
or
ON
Toggle keys are labeled with an asterisk on the keypad. They are listed below:
to display the Runco Digital Home Cinema menu. A list of several options appears for
to select a highlighted item, to toggle a checkbox (checked vs. unchecked), or to accept
to return to the previous level, such as the previous menu.
does not save changes within text editing boxes (including number editing of a slide-
Exit
Use
uous adjustment (note the adjustment increments and range depend on the
parameter being adjusted).
Use
without having to display the list first.
Use
pull-down lists.
or
keys to navigate within a menu, pull-down list or text box, or to increase
ON
OFF
or
ON
OFF
as desired. The specific toggle will occur.
OFF
Shutter*
Shutter*
Stby*
Stby*
Power*
Power*
or to change a slidebar value-hold as desired for contin-
or to change to a different option within a pull-down list
or to jump between "pages", such as in Help or lengthy
in conjunction with certain toggle keys-i.e., those including an
and hold it for approximately 1 second in hopes of turning
Power*
). Then immediately (within 2 seconds) press either
Power*
ON
+ = close the shutter (OPTIONAL)
+ = open the shutter (OPTIONAL)
OFF
+ = put the projector in standby mode
ON
+ = leave standby
OFF
+ = turn the projector on
ON
+ = turn the projector off
OFF
3-5
again to
Menu