Runco Video Xtreme VX-4c Owner's Operating Manual page 36

Time-outs
Whenever there are on-screen menus such as when there is a slidebar, menu, message or test pat-
tern displayed, you have limited time in which to make a keypad entry before the graphic disap-
pears. These time-outs vary depending on the current display, as shown in the following chart:
Using Slidebars and Other Controls
Most of the function menus allow you to change settings by using slidebars, checkboxes, and
pull-down lists. To select a slidebar, toggle a checkbox status, or view a pull-down list, do one of
the following within the function menu:
Enter the menu option number corresponding to the setting you wish to change (for
example, press
Or move the highlight to the desired parameter and press
Or move the highlight to the option desired and press
Or bypass the menus entirely and use a single key to immediately access an adjustment
during your presentation (note: applies only to options having their own key, such as
Color, Tint, Contrast, Brightness, and Volume).
Once selected, change the setting as desired (see below) and press
current function menu.
Slidebars in menus - The current value for a given parameter, such as size
or vertical scaling, appears to the left of its slidebar icon (window). This
number often expresses a percentage, or it may have units associated with it (such as pixels,
degrees Kelvin, etc.), depending on the specific option. Press
the setting up or down-both the number and the length of the bar change accordingly (for contin-
uous adjustment, hold down the desired arrow key). Or press
for specific number entry via the keypad, then press
cancel).
Accessing General Help Topics
TIME OUTS
ISF 3C Screen
Slidebar (from pres.)
Slidebar (from menu)
Lamp Timer Msg.
Channel entry
Other
to select Vertical Scaling in the Scaling Parameters menu).
2
3-10
Using Help
Setup
Keys
Source (Input) Selection
Stat/Pwr LEDs
10 seconds
5 seconds
15 minutes
30 seconds
5 seconds
15 minutes
Enter
or
Enter
or
to activate a slidebar text box
Enter
or or
Enter
OPERATION
.
.
to save and return to the
V Scaling 1000
to gradually adjust
to save (or press
Exit
to