Table of Contents
Advertisement
OPERATION
Position
Position
Press
Position
move the image left or right, use
Shutter (OPTIONAL)
Shutter*
If your projector has a mechanical lens shutter (a.k.a. dowser) installed, press and hold
approximately 1 second to toggle the shutter closed or open with a single key press (this also
blanks the image electronically). Or quickly press and release
or
ON
status). Close the shutter whenever you want to mute all display yet maintain access to projector
functions. Open the shutter to regain the display. With no shutter installed,
image electronically, but the blanking is not quite as black.
NOTES: 1) The status of the shutter is shown in the LCD window on the rear panel of the pro-
jector. 2) Upon power-up, the shutter is open. 3) The lamp remains on.
Mute
Mute*
Use
Mute*
second to toggle the audio on or off with a single key press. Or quickly press and release
and follow immediately with
you are unsure of the present status). In either case, a small message appears on screen to signi-
fy mute status.
Function Key
Func
When no menus are on-screen or active, press
cific color or colors in the display. For example,
Func
6
and also appears on the back of the IR remote keypad. DMD enabling can also be accessed
through the menu system rather than these shortcuts.
NOTE: Once
numeric entry until 2 digits have been entered or until 5 seconds of inactivity have elapsed.
Use of the
Section 3. For example, press
a Memory Bank.
to move the image using the double slidebar. At the slidebar, use
if you want to guarantee the correct toggle (useful if you are unsure of the present
OFF
to mute audio and/or hide the current menu. Press
ON
will display all colors data. The list of available color combinations is shown below
7
is pressed (with no OSD present), the projector will not respond to non-
Func
key within the menu system is noted with the appropriate topic elsewhere in
Func
Func
and
to move the image up or down.
ON
OFF
or
if you want to guarantee the correct toggle (useful if
OFF
followed by a 2-digit number to enable a spe-
Func
Func
= Red
Func
6
1
= Green
Func
6
2
= Blue
Func
6
3
= Red and Green
Func
6
4
= Green and Blue
Func
6
5
= Red and Blue
Func
6
6
= All colors
Func
6
7
in the Memory Banks menu to enable deletion or copying of
3-7
and follow immediately with
Shutter*
Shutter*
and hold for approximately 1
Mute*
will display only red and green data,
6
4
and
to
for
Shutter*
still blanks the
Mute*
Advertisement
Table of Contents
