Runco Video Xtreme VX-4c Owner's Operating Manual page 46

H-Shift
(SHORT CUT: Press
This option moves picture right and left.
NOTE: The value shown represents where the approximate center of the image lies in relation to
the total number of pixels available horizontally. This varies widely according to the signal-watch
the image while adjusting.
V-Shift
(SHORT CUT: Press
This option moves the picture up and down.
NOTE: The value shown represents where the approximate center of the image lies in relation to
the total number of pixels available vertically. This varies widely according to the signal-watch
the image while adjusting.
Blanking: Top, Bottom, Left or Right
This submenu blanks (turns to black) the top, bottom, left, or
right edge of the image so that any unwanted information is
cropped from view. For example, when displaying native size
video you may want to blank out a few of the top lines.
Image Adjustments
Use any of the following slidebars, pull-down lists or the checkbox to alter your image. Refer to
"Using Slidebars and Other Controls" (earlier in this section) if you need help in selecting options
and adjustments. Changes made to the Image Adjustments menu are applied immediately and are
saved when you exit the menu (press
and adjust the top slidebar.)
Position
and adjust the bottom slidebar)
Position
or
Exit
Image Adjustments
Contrast 50
Brightness 50
Sharpness 2
Signal Type
RGB
Color Balance
Signal Settings
Input Adjust
Image Adjustments Menu
3-20
Bottom Blanking
Right Blanking
).
Menu
OPERATION
Scaling Parameters (2)
Top Blanking 0
0
Left Blanking 0
0