Runco Video Xtreme VX-4c Owner's Operating Manual page 37

OPERATION
Double slidebars - In double slidebars, such as the
pixel tracking/pixel phase double slidebar, adjust the
top slidebar with
have finished with the top slidebar (whether changed
or not), adjust the bottom slidebar with
When you are done, press
entation. For fast continuous adjustments, hold down
the desired arrow key.
"Direct" slidebars - For quick access, you can often use a slidebar (or double slidebar) without
traveling the menu system. For example, simply press
trast slidebar accessed with the Contrast option in the Image Adjustments menu. Direct slidebars
are listed below.
Use the arrow keys to adjust a direct slidebar, or press
keypad , then
save and return to your presentation.
NOTES: 1) You can still adjust a direct slidebar as usual if the menu display is turned off (see
or OSD Settings menu) - the slidebar just won't be visible. 2) A direct slidebar disappears
OSD*
if it is not used within 5 seconds.
Checkboxes - Conditions are present if its adjacent checkbox contains a checkmark. To toggle
the checkbox, simply highlight and press
uncheck. For a checkbox that is numbered, simply enter the number of the option to toggle the
checkbox.
Pull-down lists - To see a pull-down list of options available for a given parameter labeled with
a , you can:
Use
ON
with a small
or as desired. When you
to return to your pres-
Exit
LIST OF DIRECT SLIDEBARS
H-Shift or V-Shift
Pixel Tracking or Phase
or or
Enter
Highlight it and press
Or enter the menu option number.
or
keys to navigate up and down within the list (the current choice is noted
OFF
). Press to choose an option from the list, if desired.
Enter
or .
ON
OFF
Cont
Position
Pixel
Volume
Vol
Contrast
Cont
Brightness
Bright
Color
Color
Tint
Tint
Detail
Detail
Enter
to save ( or to cancel). When you are done, press
Exit
, or highlight and use
Enter
Enter
3-11
to immediately display the same con-
and enter a specific number from the
to check and
to
Enter
to