Table of Contents
Advertisement
OPERATION
INSTALLATION MENU
Projector Configuration allows the mounting configuration of the projector to be changed
between ceiling/floor and front/rear configurations.
English is the only OSD language used in the VX-4c and VX-6c chassis.
OSD settings allows for changing the placement of the OSD. See page 3-24 for further informa
tion on how to use this function.
IR and Serial setup allows the installer to change the IR configuration of the projector and also
the baud rate of the projector. To use the control link from the VIVIX processor to control the
projector, please set the RS-232 baud rate to 9600 for proper operation.
Test Patterns allows for direct access to the internal test patterns. Please see page 3-29 for a
full list of internal patterns.
Installer Options requires the installer to enter a password. The default password is 3151 and
can be changed in the Operational Parameters menu to a custom password.
Lens Control is only available when the VX-4c / VX-6c is equipped with optional motorized
lens movement. There are options for setting the H/V shift and zoom/focus of the lens assem
bly.
Installation
Projector Configuration
ODS Language
OSD Settings
IR and Serial Setup
Geometry
Installer Options
Lens Control
Operational Parameters
3-29
Floor Front
English
Runco
Standard
Input Password
3151
Advertisement
Table of Contents
