Product Checking And Parts Identification - Mitsubishi Electric FR-D720-0.2K-G Instruction Manual

Product checking and parts identification

1.1 Product checking and parts identification
Unpack the drive unit and check the capacity plate on the front cover and the rating plate on the drive unit side face to ensure
that the product agrees with your order and the drive unit is intact.
Drive unit model
FR -
D720
Symbol Voltage class
Three-phase 200V class
D720
D740 Three-phase 400V class
Operation panel
(Refer to page 50.)
Voltage/current input switch
(Refer to page 18.)
PU connector
(Refer to page 25.)
Front cover
(Refer to page 6.)
Capacity plate
Drive unit model Serial number
Accessory

·Fan cover fixing screws (M3  35mm)
These screws are necessary for compliance with the EU Directive.
Capacity
D720-0.2K to 0.75K-G
D740-0.4K-G, 0.75K-G
D720-1.5K to 3.7K-G
D740-1.5K to 3.7K-G
2
- - G
1.5 K
Represents the drive
unit capacity [kW]
Quantity
none
1
Rating plate
FR-D720-1.5K-G
Drive unit model
MODEL
INPUT XXXXX
Input rating
OUTPUT XXXXX
Output rating
SERIAL
Serial number
Country of origin
MADE IN JAPAN
Cooling fan
(Refer to page 275.)
Control circuit terminal
block
(Refer to page 18.)
Control logic switchover
jumper connector
(Refer to page 20.)
Main circuit
terminal block
(Refer to page 15.)
Combed shaped
wiring cover
(Refer to page 7.)
DRIVE UNIT
PASSED
SAMPLE