How To Get Started - ABB UMC100.3 Manual

U M C 1 0 0 . 3 U N I V E R S A L M O T O R C O N T R O L L E R M A N U A L
6

How to get started

There are many options for using the UMC100.3. Not all functions are required in all cases. Therefore the documentation
is split into separate parts. You only need to read the parts that are relevant for your application.
The following manuals exist.
UMC100.3 Technical Manual
2CDC135032D0204
This is the main technical description and must always be read carefully before
using the UMC.
PBDTM
2CDC192012D02xx
This manual describes the configuration tool (Device Type Manager) that can be
used to configure and monitor the UMC100. It is based on the standardised FDT/
DTM technology. If you plan to only configure the UMC100 with the device de-
scription files like GSD (for PROFIBUS) or EDS (for CAN) or via the LCD panel, you
do not need to read this manual.
UMC100.3 Custom Application Editor
2CDC135034D02xx
This manual describes how to create customer-specific applications for the
UMC100.3. The Custom Application Editor is only required, if the logic built into
the UMC100.3 does not fulfill your needs. As the custom application
editor is part of the configuration tool (Device Type Manager), it is highly
recommended that you read the PBDTM manual first
Communication Interfaces
Whenever the UMC100.3 is to be connected to a fieldbus, read the appropriate
communication interface manual. Presently the following communication inter-
faces can be used together with UMC100.3:
PROFIBUS DP
DeviceNet
MODBUS RTU
Modbus TCP
PROFINET IO
EtherNet/IP
1 ) please replace xx with the latest version (e.g. 02). Consult your local sales
representative, if you are unsure regarding the latest version.
1
1
PDP32.0 2CDC 192016D02xx
DNP31.0 2CDC193005D02xx
MRP31.0 2CDC194005D02xx
MTQ22-FBP.0 2CDC194003D02xx
PNQ22-FBP.0 2CDC192015D02xx
EIU32.0 2CDC135055D0201
TM
1
1
1
1
1
1

You are now
reading this
manual