Universal Mode - ABB UMC100.3 Manual

C O N F I G U R I N G T H E M OTO R P R OT E C T I O N F U N C T I O N S

Universal Mode

In universal mode the type of each analog input channel can be configured individually. The measured values are available on the
LCD, fieldbus and function block editor. No predefined processing is done with the measured values. Processing can be done either
in the control system or in a custom application created by the custom application editor.
See custom application editor handbook for a detailed description of the available function blocks and a sample application.
I1a/b/c
Signal
I2a/b/c
Processing
I3a/b/c
—
General function description of AI111 in universal mode
Relevant Parameters in Universal Mode:.
• AI111 AM1/2 Enabled
• AM1,2 CH1/2/3 Error Reaction
AI1
AI2
AI3
• AM1,2 Mode
• AM1,2 Channel 1/2/3 Type
59