How To Get Started - ABB UMC100.3 Manual

6 C U S T O M A P P L I C AT I O N E D I T O R M A N U A L
—

How to get started

There are many options for using the UMC100.3. Not all functions are required in all cases. Therefore the documentation is
split into separate parts. You only need to read the parts that are relevant for your application.
The UMC100.3 documentation is split into the following manuals.
UMC100.3 Technical Manual (2CDC135032D0204)
This is the main technical description and must be read carefully
PBDTM (2CDC192012D0209)
This manual describes the configuration tool
(Device Type Manager) that can be used to configure and monitor the UMC100.3 (V6.0).
Use version V5.0 for other ABB control products like UMC100.3, UMC22, softstarters and circuit breakers .
It is based on the standardised FDT/DTM technology.
If you plan to only configure the UMC100 with the device description files like GSD (for PROFIBUS) or EDS (for DeviceNet) or
via the LCD panel you do not need to read this manual.
UMC100.3 Custom Application Editor (2CDC135034D0201)
This manual describes how to create customer-specific applications for the UMC100. You only need to read this manual if the
logic built into the UMC100 does not fulfill your needs. As the custom application editor is part of the configuration tool
(Device Type Manager) it is highly recommended that you read the PBDTM manual first.
You are now reading this manual.
FIM UMC Edition (2CDC135075M0201)
This manual describes the configuration software FIM UMC Edition that can be used to configure and monitor the UMC100.3.
This software is based on the FDI (Field Device Integration) standard for the configuration of field devices.
FIM UMC Edition replaces the former PBDTM software.
If you plan to only configure the UMC100.3 with device description files like GSD (PROFIBUS), GSDML (Profinet) or EDS
(DeviceNet, EtherNet/IP ) or via the UMC100-PAN control panel you do not need to read this manual.
TM
Fieldbus and Ethernet Communication Interfaces
Whenever the UMC100.3 is to be connected to a fieldbus or Ethernet network, read the appropriate manual. Presently
communication interfaces for PROFIBUS DP (PDP32.0), Modbus RTU (MRP31.0) and DeviceNet (DNP31.0) exist. For
TM
Ethernet there are EtherNet/IP (EIU32.0), Modbus TCP (MTQ22-FBP.0) and Profinet (PNQ22-FBP.0) available.
TM
The UMC100.3 can be used together with these communication interfaces.