Specifying A Text String; Use The Lcd Panel As Parameter Storage - ABB UMC100.3 Manual

T H E LC D C O N T R O L PA N E L U M C 1 0 0 - PA N

Specifying a text string

This type of dialog allows a character string to be specified e.g. an error message. With the up/down keys you can scroll through the
alphabet and several special characters. Pressing 'Next' selects the next character to edit.
When the last character is reached you can save the text string by pressing 'Save' or discard the changes pressing 'Cancel'.
Cancel
editing
Next character
in ABC

Use the LCD panel as parameter storage

For backup purposes or if several UMCs should be configured with a similar or same set of parameters the LCD panel can be used
as storage. Up- and download are done by command. You can choose if you uploaded or download only the application or only the
parameters or both.
Please note that the bus address will not be overwritten during download. This prevents communication problems
due to the usage of the same bus addresses multiple times.
In case of a device replacement this means that the bus address must be set separately!
Last character
to edit
Previous character
in ABC
Next character
109
Save changes