Replacing A Umc100.3; Replacing An I/O Module; Requesting Support; Check The Configuration - ABB UMC100.3 Manual

E R R O R H A N D L I N G , M A I N T E N A N C E A N D S E R V I C E

Replacing a UMC100.3

The UMC and the internal current transformer are calibrated together in the ABB factory.
Therefore the UMC must be completely replaced.
Set the parameters in the new UMC depending on your parameterisation concepts.
If you stored the parameters and/or your user defined application in the UMC100-PAN you can just download them
from the panel back to the UMC100.3.
After mounting and connecting a new UMC, the communication starts up again.

Replacing an I/O Module

I/O modules are automatically parameterized by the UMC if the communication between UMC and I/O module has been
established. No further user actions are required.

Requesting support

If you need support we kindly ask you to contact your local ABB representative using the template provided at the end of
this manual.

Check the configuration

The menu option "Changed parameters" in the Service menu displays all parameters with changed settings (i.e., parameters with
settings different from the default settings).
Using this function you can quickly check whether all parameters are set correctly
119