Pick Mode - Wasp WWS750 Quick Reference Manual

the Enter/Exit Programming bar code above, then either
of the barcodes below.
Motion Aiming Control =

Pick Mode

Pick Mode is a Decoding and Transmission process where
bar codes that are not within the configurable distance
from the center of the aiming pattern are not acknowl-
edged or transmitted to the host. It is active only in Trigger
Single mode. If the scanner switches to a different Read
Mode, Pick Mode is automatically disabled.
NOTE
Quick Reference Guide
Enable
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
ENTER/EXIT PROGRAMMING MODE
PIck Mode = Disable
Pick Mode = Enable
Motion Aiming Control =
Disable
Pick Mode
23