Wasp WWS650 How-To Manual

Linking the reader

Hide thumbs Also See for WWS650:

Download this manual

Portal > Knowledgebase > Hardware >

WWS650 & WWS750 scanner: how to link (pair) to

base

WWS650 & WWS750 scanner: how to link (pair) to base

Scott Kircher - 2020-08-07 - in

Hardware

If needed, user manuals can be downloaded from the article linked below in Related Pages.

To link (pair) the scanner to the base, use only the following instructions, which are from

Page 10 of the scanner's QRG (Quick Reference Guide):

Page 1 Portal > Knowledgebase > Hardware > WWS650 & WWS750 scanner: how to link (pair) to base WWS650 & WWS750 scanner: how to link (pair) to base Scott Kircher - 2020-08-07 - in Hardware If needed, user manuals can be downloaded from the article linked below in Related Pages.
Page 2 ======================================================= WWS650 & WWS750: link scanner to base (comprehensive steps if there is trouble pairing): 1a. WWS650: The base station requires connecting the USB data cable from the base to the PC. There is no separate power supply needed. 1b. WWS750: The base station requires connecting the AC power cable (from the wall), and the USB data cable from the base to the PC.
Page 3 4. Scan "Unlink" conﬁguration barcode (single beep). 5. Mount the scanner into the base. The "READER" LED will show red. The "RADIO" LED will blink brieﬂy, and the scanner will give 3 ascending beeps. The scanner should now be paired to the base. To test, run a program that accepts text input from a keyboard (such as Notepad or Word), then scan a data barcode (not a conﬁguration barcode).

Wws750