Error Codes - Wasp WWS750 Quick Reference Manual

Error Codes

INDICATION
Label Pro-
gramming
Mode Accep-
tance of Par-
tial Label
Label Pro-
gramming
Mode Accep-
tance of Pro-
gramming
Label Pro-
gramming
Mode Cancel
Item Entry
Error Codes
Upon startup, if the reader sounds a long tone, this means
the reader has not passed its automatic Selftest and has
entered FRU (Field Replaceable Unit) isolation mode. If the
reader is reset, the sequence will be repeated. Press and
release the trigger to hear the FRU indication code.
The following table describes the LED flashes/beep codes
associated with an error found.
Number of LED
Flashes/Beeps
1
2
6
11
30
DESCRIPTION
In cases where
multiple labels
must be scanned
to program one
feature, this indica-
tion acknowledges
each portion as it is
successfully
scanned.
Configuration
option(s) have been
successfully pro-
grammed via labels
and the reader has
exited Program-
ming Mode.
Cancel label has
been scanned.
Configuration
Interface PCB
LED
N/A
N/A
N/A
Error
Digital PCB
Imager
BEEPER
Reader sounds
one short beep at
highest fre-
quency and cur-
rent volume.
Reader sounds
one high fre-
quency beep and
4 low frequency
beeps followed by
reset beeps.
Reader sounds
two times at low
frequency and
current volume.
Corrective
Action
Contact
Helpdesk for
assistance
WASP WWS750