Transmitting A Dtmf Code; Dtmf Transmission Speed - Icom IC-V82 Instruction Manual

■ Transmitting a DTMF code

D Using a DTMF memory channel
qPush [A•
], then push [0•
FUNC
.
MODE
• Rotate [VOL] to select "dtm.OF," if necessary.
wPush [0•
] for 1 sec. to enter the DTMF memory.
OPT
e Rotate [VOL] to select the desired channel.
r Push [MONI] or [PTT] to exit the DTMF memory mode.
tWhile pushing [PTT], push [MONI] to transmit the selected
DTMF memory.
• After the DTMF code is transmitted, the transceiver returns to re-
ceive automatically.
D Manual DTMF code transmission
While pushing [PTT], push digit keys, [A•
] and [✱•
[C• ], [D• ], [#•
MR CLR BANK
code manually.
• [✱• ] enters as "E", [#•
ENT BANK
] to enter
OPT OPTION SET
], [B• ],
FUNC CALL
] to transmit a DTMF
ENT
] enters as "F."

■ DTMF transmission speed

When slow DTMF transmission speeds are required with
DTMF memory transmission (as for some repeaters), the
transceiver's rate of DTMF transmission can be adjusted.
qWhile pushing [Y Y ] and [Z Z ], turn the power on to enter
.
TIAL SET MODE
wPush [Y Y ] or [Z Z ] several times until "dtd" appears.
eRotate [VOL] to select the desired DTMF transmission
speed.
• Four speeds are available: "1" (100 msec. intervals) is the fastest;
"5" (500 msec. intervals) is the slowest.
rPush [✱•
] to exit
INITIAL SET MODE
ENT
7
DTMF MEMORY
INITIAL SET MODE
USING
-
INI
.
7
27