Table of Contents
Advertisement
TVF ENV Level
fig.09-39(LCD_TvfEnvLevel)
L1 (Level 1)
Sets the of point 1.
Value: 0–100
L2 (Level 2)
Sets the level of point 2.
Value: 0–100
L3 (Level 3)
Sets the level of point 3.
Value: 0–100
SusL (Sustain Level)
This sets the level of point 4.
Value: 0–100
EndL (End Level)
To lower the level after releasing the key, set this to 0, and to raise the level, set it to 100.
Value: 0, 100
* The End Level is retained until you release and play the key again.
* If the Levels of two adjacent points are set to similar values, the time between these two points may prove to be
shorter than what is actually set, or even zero.
Tone Parameters
65
Advertisement
Table of Contents
