Roland V-Card VC-1 D-50 Owner's Manual page 63

For v-synth xt

Hide thumbs Also See for V-Card VC-1 D-50:

Table of Contents

Keyfollow Adjustment

fig.09-34e(bias/direction)

Middle C (C4)

The curve in the picture represents the Keyfollow value with the bias level added.

• TVF Keyfollow (Cutoff Point):

• Bias Direction:

TVF ENV (TVF Envelope)

fig.09-35(LCD_TVF/TVF ENV)

Depth (ENV Depth)

Sets the depth of the TVF ENV modulation that changes the TVF

cutoff Point. Higher values deepen the effect.

Value: 0–100

Velo (Velocity Range)

Sets the sensitivity of the velocity than controls the depth of the

TVF ENV. At higher values, the effect is deeper by playing

harder.

Value: 0–100

DKF (Keyfollow (Depth))

This can change the TVF ENV depth depending on the key played. Higher values change the depth more

drastically.

Value: 0–4

TKF (Keyfollow (Time))

fig.09-36(TimeKeyFollow)

This can change the time of the TVF ENV depending on the key

played. Higher values change the time more drastically.

Value: 0–4

Angle

Value

>C4

Tone Parameters

Table of Contents