Useful Functions For Editing - Roland V-Card VC-1 D-50 Owner's Manual

Creating a Patch

Useful Functions for Editing

The VC-1 provides numerous ways in which you can edit your own patches more conveniently.
Editing a Value
To edit a value, you can use the VALUE dial, [INC/+] or [DEC/-].In each VC-1 screen, you can select a
value using the cursor as described earlier, and modify its value. Each parameter has its own range of
possible values. You CANNOT set any value smaller than the minimum value or greater than the
maximum value.
fig.08-03(ValueDial,etc)
Cursor Buttons
Press [
VALUE dial
• Turning the VALUE dial clockwise increases the value, and turning it counterclockwise decreases its
value.
• Hold down [SHIFT] as you move the VALUE dial to increase value increments to make large value
changes more quickly.
[INC/+] and [DEC/-]
• Press [INC/+] to increase the selected value, and [DEC/-] to decrease it.
• Keep the button pressed for continuous adjustment.
• For faster value increases, keep [INC/+] pressed down and press [DEC/-]. To decrease values quickly, keep
[DEC/-] pressed down and press [INC/+].
• Hold down [SHIFT] while using [INC/+] or [DEC/-], the value will change in larger steps.
Undoing an editing Operation
The Undo function returns the current value of the parameter to the original value before being edited.
This only refers to the last parameter that has been adjusted.
fig.08-04(LCD_pulldown_undo)
1.
In the upper right of the screen, touch <
appears.
2.
In the pulldown menu, touch <UNDO>.
44
], [ ], [ ], or [ ] (the cursor buttons) to move the cursor.
>. A pulldown menu