Roland V-Card VC-1 D-50 Owner's Manual page 60

Tone Parameters
WG Mod (WG Modulation)
fig.09-27z(LCD_PitchWfMod)
LFO (LFO Mode)
fig.09-28e(LFO_Mode)
Selects one of the following four vibrato modes.
Value: OFF, (+), (-), A&L
Display
OFF
(+)
(-)
A&L
ENV (P-ENV Mode)
fig.09-29e(P-ENV_Mode)
Selects one of the following three modes, determining how the
pitch is controlled by P-ENV.
Value: OFF, (+), (-)
Display
OFF
(+)
(-)
Bend (Bender Mode)
Selects how the pitch is controlled by the bender lever as follows.
Value: OFF, KEY, NOM
Display
OFF
KF
NOM
60
Description
No vibrato is obtained.
Vibrato is on.
Vibrato is on but inverted.
Vibrato can be obtained only by Aftertouch
and Bender Lever.
Description
No alteration.
Pitch changes with the set P-ENV curve.
Pitch changes with the P-ENV curve inverted.
Description
No pitch alteration by moving the lever right or the left.
Pitch changes within the Bender range, set in Patch Factors, plus Keyfollow (Pitch) of WG.
Pitch changes within the Bender range, set in Patch Factors.
Normal
"-" is selected.
"+" is selected.
"-" is selected.