Roland V-Card VC-1 D-50 Owner's Manual page 52

Tone Parameters
fig.09-12(LCD_P-ENV/Time)
T1 (Time 1)
Sets the time needed from point 0 (the moment the key is pressed)
to point 1.
Value: 0–50
T2 (Time 2)
Sets the time needed from point 1 to point 2.
Value: 0–50
T3 (Time 3)
Sets the time needed from point 2 to point 3.
Value: 0–50
T4 (Time 4)
Sets the time needed from the moment the key is released to point 4.
Value: 0–50
P-ENV Level Edit
fig.09-13(LCD_P-ENV/Level)
L0 (Level 0)
Sets the pitch created the moment a key is pressed.
Value: -50–+50
L1 (Level 1)
Sets the pitch of the point 1.
Value: -50–+50
L2 (Level 2)
Sets the pitch of the point 2.
Value: -50–+50
SusL (Sustain Level)
Sets the pitch of point 3.
Value: -50–+50
EndL (End Level)
Sets the pitch of point 4.
Value: -50–+50
* If the Levels of two adjacent points are set to similar values, the time between these two points may prove to be
shorter than what is actually set, or even zero.
52