Roland V-Card VC-1 D-50 Owner's Manual page 30

Transferring Patches To and From the D-50/550
Transfer the patch from the memory card to the D-50/550
All the 64 Patches data stored on the Memory Card can be loaded to the D-50/550's internal memory.
Using the D-50
2-1
6-1
1.
Insert the Memory Card (M-256D) into the D-50 Card Slot.
2.
Turn the Memory Protect of the D-50 to OFF.
2-1.
Press the [TUNE/FUNCTION] button.
2-2.
Select "Protect" with the Selector button and turn it OFF with the joystick.
3.
Press the [DATA TRANSFER] button.
4.
Select "(Card -> Int)" with the corresponding Selector button.
5.
Press [ENTER] button. When the data transfer is completed, the display shows "Complete."
6.
Return the Memory Protect of the D-50 to On.
6-1.
Press the [TUNE/FUNCTION] button.
6-2.
Select "Protect" with the Selector button and turn it ON with the joystick.
Using the D-550
1.
Insert the Memory Card (M-256D) into the D-550 Card Slot.
2.
Press the [DATA TRANS] button.
3.
Using the [
4.
Press the [ENTER] button.
5.
Press the [WRITE] button to turn the Memory Protect OFF temporarily.
6.
Press the [ENTER] button again. When the data transfer is completed, the display shows "Complete."
30
2-2 4
6-2
] or [ ] buttons, select "(Card -> Int)."
[EXIT] 3
4, 6
3
5
5 3