Roland V-Card VC-1 D-50 Owner's Manual page 22

Applying Effects to the Sound
OUTPUT (Output Mode)
The Output Mode determines how the Tones take on the reverb effect, and how the Tones appear at the
outputs.
A sound reverberated in an acoustic environment consists of three parts. First, you hear the direct sound
as it travels from the source outward. Next the early reflection resounds once, or several time, from the
walls, ceiling ,and floor. Finally, you hear the reverberated sound as it reflects many times in the
environment.
fig.05-16e(LCD_PatchEditControl/Output)
Sound Generator
Mode (Output Mode)
Selects one of the following four output modes.
Value: 1–4
Display
22
Reverb Sound
Direct Sound
Listener
Function
Stereo reverb works on the mixed sound of Upper and Lower Tones, and id
sent out in stereo.
The Mixture of Upper and Lower takes on stereo reverb, and the direct sound
is sent out separately for Upper and Lower.
Only the Upper Tone takes on reverb. Upper and lower Tones are sent out
separately.
Only the Lower Tone takes on reverb, Upper and Lower Tones are sent out
separately.