Roland V-Card VC-1 D-50 Owner's Manual page 46

Creating a Patch
Copying Tone Settings
A Tone from another Patch can be copied to the patch currently selected (Tone Copy).
fig.08-05(LCD_Pulldown_ToneCopy)
1.
Make sure the PATCH TOP screen is displayed.
2.
Touch <
appears.
3.
In the pulldown menu, touch <TONE COPY>. The TONE COPY
window appears.
fig.08-06(LCD_ToneCopyWindow)
4.
Touch some buttons (checkbox) in the left side of the screen to
select the object you want to copy (✔).
Display
5.
Touch a button (valuebox) in the right side of the screen to select
the destination Tone.
Display
6.
Touch <Execute> to execute the copy operation. If you want to cancel without executing, touch
<CANCEL>.
46
> in the upper right of the screen. A pulldown menu
Value
I1-11–I8-88,
<Source>
P1-11–P6-88
Off, On (✔),
<TONE>
UPPER, LOWER
<PATCH FACTOR> Off, On (✔)
<CTRL SETUP> Off, On (✔)
Value
<TONE> UPPER, LOWER
1
2 3