Roland V-Card VC-1 D-50 Owner's Manual page 32

Transferring Patches To and From the D-50/550
Saving Transferred Patches
The transferred patch data (64 patches) will be lost if you turn off the power. Be sure to save the data.
fig.04-04(LCD_ModeMenu_DataTrans)
1.
Press [MODE] on the VC-1. The MODE MENU window appears.
2.
Touch <DATA TRANSFER>. The DATA TRANSFER screen
appears.
fig.04-04a(LCD_DataTrans_BankSave)
3.
Touch <Bank Copy> in the left of the screen. The Bank Copy
screen appears.
4.
When editing a parameter that requires you to specify a value,
move the cursor to the value box of that parameter. Then modify
the value by either turning the VALUE dial or pressing [INC/+] or
[DEC/-].
Source Bank
Selects the save-source bank.
Value: P1 – P6, I1 – I8
Destination Bank
Selects the save-destination bank.
Value: I1 – I8
5.
Touch <OK> to execute the Save operation. If you want to cancel without executing, touch <Cancel>.
32