Utility Settings (Utility); Transferring Setups To External Devices (Setup Bulk Dump) - Roland RD-300SX Owner's Manual

Settings for Each Function ([EDIT])

Utility Settings (Utility)

Transferring Setups to External
Devices (Setup Bulk Dump)
You can transfer the contents of Setups to an external MIDI device.
This operation is called "bulk dump."
Use this procedure to save the data to an external MIDI device in
situations such as when you want to perform by connecting another
RD-300SX with the same settings, or to prevent your Setups from
corruption.
1.
Connect the RD-300SX and the external sequencer, using
an optional MIDI or USB cable (sold separately).
2.
Press [EDIT].
The indicator lights, and the RD-300SX switches to Edit mode.
3.
Press [INC] or [DEC] to select "Utility," then press [ENTER].
fig.disp.Utl
4.
Referring to the following, press the TONE SELECT button
to which the parameter you want to change is assigned,
then select the parameter.
TONE SELECT Indication
button
PIANO
E.PIANO
ORGAN
STRINGS/
PAD
GUITAR/
BASS
BRASS/ —
WINDS
VOICE/ —
SYNTH
RHY/GM2 —
Only the indicators of buttons to which a parameter is assigned
light.
Stop the rhythms and do not touch the keys or controllers when
performing the Bulk Dump procedure.
44
Description
Bulk Dump Temporary
(p. 44).
Bulk Dump Setup (p. 44).
Factory Reset (p. 45).
TX Mode (p. 46)
Local Control (p. 46)
—
—
—
Bulk Dump Temporary
The content of the currently selected Setup is transmitted.
5.
Press [PIANO].
The following screen appears, and [PIANO] flashes.
fig.disp.bdt
6.
Put the external sequencer in record mode.
7.
Press [ENTER].
A confirmation screen (Sure?) appears.
If you do not want to transmit the settings, press [EXIT].
8.
Press [ENTER] again to transmit the settings.
When the transfer is completed, you can return to Step 3.
9.
Stop the external sequencer.
Bulk Dump Setup
The content of all Setups is transmitted.
5.
Press [E.PIANO].
The following screen appears, and [E.PIANO] flashes.
fig.disp.bdS
6.
Put the external sequencer in record mode.
7.
Press [ENTER].
A confirmation screen (Sure?) appears.
If you do not want to transmit the settings, press [EXIT].
8.
Press [ENTER] again to transmit the settings.
When the transfer is completed, you can return to Step 3.
9.
Stop the external sequencer.