Playing Different Tones In Two Different Sections Of The Keyboard ([Split]) - Roland RD-300SX Owner's Manual

Performing with the Keyboard
Playing Different Tones in Two Different Sections of the Keyboard
([SPLIT])
Such a division of the keyboard into right- and left-hand sections is called a "Split,"
and the key where the division takes place is called the "Split Point." The split-point
key is included in the LOWER section.
The Split Point has been set at the factory to "B3."
fig.01-10
1
Press [SPLIT], getting the indicator to light.
[LOWER SELECT] lights.
Try fingering the keyboard.
The UPPER tone plays in the right-hand section of the keyboard, and the LOWER
tone plays in the left-hand section.
fig.01-12
LOWER
2
To exit Split mode, press [SPLIT] once more, and the indicator light goes out.
22
Split Point (B3)
UPPER
You can change the split point.
Please refer to "Changing the
Keyboard's Split Point" (p.
23).
1, 2
"Changing the Tone for a
Zone" (p. 24)
"Adjust the Volume Level for
Individual Zones (ZONE
LEVEL sliders)" (p. 24)