Performing With Two Layered Tones ([Dual]) - Roland RD-300SX Owner's Manual

Performing with Two Layered Tones ([DUAL])

fig.01-08
1
Press [DUAL], getting the indicator to light.
Try fingering the keyboard.
fig.disp.tone1
The tones for UPPER and LOWER are layered and played.
When you press [DUAL], the [LOWER SELECT] indicator automatically light up,
and the LOWER tone number appears in the display. You can display the UPPER
TONE number by pressing [LOWER SELECT] so its indicator goes out.
2
Press [DUAL] once more, and the indicator light goes out.
The tone for UPPER played.
Pressing Two TONE SELECT buttons Simultaneously
You can layer two tones by pressing two TONE SELECT buttons simultaneously.
For example, if you want to layer a piano sound with strings, together press both
[PIANO] and [STRINGS].
[DUAL] starts to flash and when you begin playing the keyboard, the piano and
strings sounds are layered together.
When this is done, the tone for the button that is pressed down first (indicator lit in
red) is assigned to UPPER, and the other tone (indicator lit in orange) is assigned to
LOWER.
Once you have selected two TONE SELECT buttons, pressing either TONE SELECT
button then selects that tone as the [UPPER] tone, and the LOWER tone stops
playing.
* You cannot layer two tones when [SPLIT] is set to ON.
Performing with the Keyboard
1, 2
"Changing the Tone for a
Zone" (p. 24)
"Adjust the Volume Level for
Individual Zones (ZONE
LEVEL sliders)" (p. 24)
21