Panel Descriptions; Front Panel - Roland RD-300SX Owner's Manual

Panel Descriptions

Front Panel

fig.00b-01
2
1 3 4 5
1.
VOLUME slider
Adjusts the overall volume that is output from the rear panel
OUTPUT jacks and PHONES jack (p. 14).
2.
EQUALIZER/EFFECTS
[LOW] knob
Adjusts the sound's low-frequency range.
[HIGH] knob
Adjusts the sound's high-frequency range.
3.
[SOUND CONTROL/V-LINK]
[SOUND CONTROL] switches SOUND CONTROL on/off (p. 30).
[V-LINK] switches the V-LINK function on/off (p. 51).
4.
[REVERB]
Switches REVERB on/off (p. 27).
5.
[MULTI EFFECTS]
Switches the multi-effects on/off (p. 28).
6.
ZONE LEVEL sliders
Adjusts the volume level in each zone (p. 24).
7.
[MIDI TX]
Enables control of external MIDI sound modules from the RD-
300SX (p. 46, p. 47, p. 48).
8.
[RHYTHM/TEMPO]
[RHYTHM] is used to turn the rhythm performance on and off (p. 32).
[TEMPO] is used to change the rhythm tempo (p. 33).
9.
[SHIFT/EXIT]
[SHIFT] is pressed simultaneously with other buttons to execute
various functions.
[EXIT] is pressed to return to previous screens.
10. [TRANSPOSE/ENTER]
[TRANSPOSE] sets the range of the keyboard to transposed (p. 25).
[ENTER] is used to finalize a value or execute an operation.
11. DISPLAY
This shows the Tone numbers and the values of various
settings, etc.
12. [DEC], [INC]
This is used to modify values.
If you keep on holding down one button while pressing the
other, the value change accelerates.
6
7 8 11
9 10
12
13. ONE TOUCH
14. MODE
15. [LOWER SELECT/KEY TOUCH]
16. FUNCTION
17. TONE SELECT buttons
Pitch Bend/Modulation lever
fig.00b-02
13 14
17
[PIANO]
Selects the optimum settings for piano performances (p. 18).
[SETUP]
Calls up the stored settings (Setup) (p. 34).
[DUAL]
Switches the RD-300SX to "Dual Mode," which enables
performances with two separate tones layered together (p. 21).
[SPLIT]
Puts the keyboard in "Split mode," wherein you can use more
than one tone by having different tones play in different parts of
the keyboard (p. 22).
When this is switched to on, you can select the LOWER ZONE
tone with the TONE SELECT buttons (p. 24). This button is also
used to change the keyboard touch (p. 26).
[EDIT]
Press this button when you wish to adjust various settings (p. 37).
In addition, you can listen to the demo songs by simultaneously
pressing this button and [WRITE] (DEMO PLAY) (p. 17).
[WRITE]
Stores the current settings to "Setup" (p. 35).
Pressed to select a tone's category (p. 19).
This allows you to control pitch bend or apply vibrato (p. 30).
16
15
9