Roland RD-300SX Owner's Manual page 23

Changing the Keyboard's Split Point
You can change the point at which the keyboard is divided (the Split Point) in Split
mode.
1
Hold down [SPLIT] for several seconds.
A screen such as the following appears, and the current value of the setting is
displayed.
fig.disp.b3
2
While holding down [SPLIT], press the key that you want to use as the split
point.
You can adjust the split point in semitone increments.
When you release [SPLIT], the previous display will reappear.
* The split-point key is included in the LOWER section.
fig.01-13
B3 (when the power is turned on)
A0
Range in which the split point can be set
Performing with the Keyboard
B7
You can also change the split
point by holding down [SPLIT]
and pressing [INC] or [DEC].
The key for the split point
appears in the display as
shown below.
fig.01-11
Display
Letter
C C D E
name
Display
Letter
E F F G
name
Display
Letter
A A B B
name
23