Table of Contents
Advertisement
Utility Settings (Utility)
Utility includes functions for sending data to external MIDI
sequencers and other devices and for restoring the settings to
their original factory state.
For more on "Rec Mode" and "Local Control" in
Utility menu, refer to "Settings for Recording (Rec
Mode/Local Control)" (p. 78).
Transferring the RD-300GX's Settings
to an External MIDI Device
(Bulk Dump)
You can transfer the contents of a Setup to an external MIDI
device. This operation is called "bulk dump."
The RD-300GX lets you send the contents of the currently
selected Setup to an external MIDI device. This is convenient
when you're recording a song.
1.
Use a MIDI cable (optional) to connect the RD-
300GX's MIDI OUT connector to the MIDI IN
connector on an external sequencer.
2.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
3.
Press the [INC] button to select "Utility," then
press the [ENTER] button.
4.
Use the [DEC] [INC] buttons to select "Bulk
Dump," then press the [ENTER] button.
The following screen appears.
fig.disp
5.
Put the external sequencer in record mode.
6.
Press the [ENTER] button to transmit the settings.
The message "Executing..." appears in the display
during transmission of the data.
7.
After the transmitting is finished, the display
will indicate "Completed."
You are returned to the Edit screen.
8.
Stop the external sequencer.
Detailed Settings for Each Function ([EDIT] Button)
Restoring the Settings to the Factory
Condition (Factory Reset)
The settings stored in the RD-300GX can be returned to their
factory settings.
NOTE
NOTE
1.
Press the [EDIT] button, getting the indicator to
light.
The Edit Menu screen appears.
2.
Press the [INC] button to select "Utility," then
press the [ENTER] button.
3.
Use the [DEC] [INC] buttons to select "Fctry
Reset Cur" or "Fctry Reset All," then press the
[ENTER] button.
Parameter
Fctry Reset
Cur
Fctry Reset
All
The following screen appears.
fig.disp
To cancel the Factory Reset, press the [EXIT/SHIFT]
Currently
selected
button.
Setup name
4.
Press the [ENTER] button once again to start
the Factory Reset operation.
NOTE
After the Factory Reset operation is finished, The Utility
screen returns to the display.
NOTE
Executing "Factory Reset All" results in deletion of
the Setups (p. 50). If you want to keep the
recorded content, save the Setup file to your USB
memory (p. 72).
When making USB connections, be absolutely sure
to disconnect the USB cable before starting.
Description
The currently selected Setup returned to their
factory settings.
The settings stored in the RD-300GX can be
returned to their factory settings.
"Executing..." appears in the display while the
Factory Reset is in progress. Be sure never to turn
off the power.
While the Factory Reset is in progress, no sounds
are produced even when the keys are pressed. In
addition, song, and Rhythms being played are
also stopped.
77
Advertisement
Table of Contents
