Changing The Pitch (Fine Tune); Changing The Bend Range (Bend Range); Making The Settings For Each Zone Individually(Zone Parameter); How To Make Settings - Roland RD-300SX Owner's Manual

Settings for Each Function ([EDIT])

Changing the Pitch (Fine Tune)

Adjusts the pitch of the tone's sound up or down in 1-cent steps
(+/-50 cents).
Value
-50 – 50 (cent)
One cent is 1/100th of a semitone.
Changing the Bend Range
(Bend Range)
This sets the amount of pitch change that will occur when you move
in semitone increments
the Pitch Bend lever
Value
0–24
42
(+/-2 octaves).
Making the Settings for
Each Zone Individually
(Zone Parameter)

How to Make Settings

1.
Press [EDIT].
The indicator lights, and the RD-300SX switches to Edit mode.
2.
Press [INC] or [DEC] to select "U-L," then press [ENTER].
fig.disp.U-L
3.
Referring to the following, press the TONE SELECT button
to which the parameter you want to change is assigned.
The parameter name appears in the display while the button is
held down. When the button is released, the value for the
parameter is shown in the display.
When setting the LOWER zone, set [LOWER SELECT] to ON.
TONE Indication
SELECT
button
PIANO
E.PIANO
ORGAN
STRINGS/
PAD
GUITAR/
BASS
BRASS/
WINDS
VOICE/ —
SYNTH
RHY/GM2 —
Only the indicators of buttons to which a parameter is assigned
blink.
4.
Press [INC] or [DEC] to set the value.
5.
Press [EDIT] to turn off the indicator and quit editing.
You can return to Step 2 by pressing [EXIT].
Parameter
Key Transpose
Pan
Damper Pedal Switch
Control Pedal Switch
Bender Switch
Modulation Switch
—
—