Roland RD-300SX Owner's Manual page 57

Indicated Effect name
number
3TAP PAN
47
DELAY
48 4TAP PAN
DELAY
49 MULTI TAP
DELAY
50 REVERSE
DELAY
51 SHUFFLE
DELAY
52 3D DELAY
53 TIME CONTROL
DELAY
LONG TIME
54
CONTROL
DELAY
55 TAPE ECHO
56 LOFI NOISE
57 LOFI
COMPRSSOR
58 LOFI RADIO
TELEPHONE
59
60 PHONOGRAPH
61 PITCH
SHIFTER
62 2VOICE PITCH
SHIFTER
63 STEP PITCH
SHIFTER
64 REVERB
65 GATED
REVERB
OVERDRIVE
66
→CHORUS
67 OVERDRIVE
→FLANGER
Overview
Produces three delay sounds; center, left and
right.
This effect has four delays.
This effect provides four delays with feed-
back.
This is a reverse delay that adds a reversed
and delayed sound to the input sound.
Adds a shuffle to the delay sound, giving the
sound a bouncy delay effect with a swing
feel.
This applies a 3D effect to the delay sound.
The delay sound will be positioned 90 de-
grees left and 90 degrees right.
A stereo delay in which the delay time can be
varied smoothly.
A delay in which the delay time can be varied
smoothly, and allowing an extended delay to
be produced.
A virtual tape echo that produces a realistic
tape delay sound.
In addition to a Lo-Fi effect, this adds various
types of noise such as white noise and disc
noise.
This is an effect that intentionally degrades
the sound quality for creative purposes.
In addition to a Lo-Fi effect, this effect also
generates radio noise.
This applies a telephone sound.
Simulates a sound recorded on an analog
record and played back on a record player.
A stereo pitch shifter.
Shifts the pitch of the original sound. This 2-
voice pitch shifter has two pitch shifters, and
can add two pitch shifted sounds to the orig-
inal sound.
This pitch shifter changes the shift volume of
the pitch shift sound in a stepped fashion.
Adds reverberation to the sound, simulating
an acoustic space.
This is a special type of reverb in which the
reverberant sound is cut off before its natural
length.
This effect connects an overdrive and a cho-
rus in series.
This effect connects an overdrive and a
flanger in series.
Effect parameter name when changed by holding down
[MULTI EFFECTS] and pressing [INC] or [DEC] (p. 29):
An overview thereof (Value)
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
Balance:
Volume balance between the direct sound and the delay sound
(0–100)
Echo Level:
Volume of the echo sound (0–127)
Balance:
Volume balance between the direct sound and the effect sound
(0–100)
Balance:
Volume balance between the direct sound and the effect sound
(0–100)
Balance:
Volume balance between the direct sound and the effect sound
(0–100)
Balance:
Volume balance between the direct sound and the effect sound
(0–100)
Balance:
Volume balance between the direct sound and the effect sound
(0–100)
Fine:
Adjusts the pitch of the pitch shifted sound (0–100)
Balance:
Volume balance between the Pitch Shift 1 and Pitch Shift 2
sounds (0–100)
Rate:
Rate of modulation (0–21)
Time:
Time length of reverberation (0–127)
Balance:
Volume balance between the direct sound and the reverb
sound (0–100)
Chorus Balance:
Adjusts the volume balance between the sound that is sent
through the chorus and the sound that is not sent through the
chorus (0–100)
Flanger Balance:
Adjusts the volume balance between the sound that is sent
through the flanger and the sound that is not sent through the
flanger (0–100)
Effects List
57