M@ Values For The Parameters/Changing Their Settings; Selecting The Sound Assigned To A Part - Instrument - Roland SOUND Canvas P-55 Owner's Manual

PART PARAMETERS |
The P-55 is capable of playing three Parts. For each of these Parts you can make settings which determine the particular MID!
channel on which it will respond to MIDI data, and what sound it will produce as a result. In addition, other settings such as those
for reverb and chorus can also be made.
m@ Altering the Settings for Part Parameters ] eceececccccccccccoccoccce
To alter the settings for the parameters included in Part Parameters 1, you first need to
press the Parameter Group button and confirm that its indicator is dark. Then press PART
"4 or PART » and select whichever of the Parts (from 1 — 3) for which you wish to
make parameter settings.
m@ Values for the Parameters/Changing Their Settings eccescecccccccccce
@ Selecting the Sound Assigned to a Part — Instrument
[Acceptable Values] P01 — P15, E16 — E25, 026 — 032
<> Press INSFRUMENT <4 or INSTRUMENT ® and select a tone.
* For information on the Instruments contained in the P-55, please refer to the
"Instrument Chart" (p. 40).
Concerning Display of Instrument Numbers
At times, a dot will be displayed along with the Instrument Numbers. By the position of
this dot, you can determine what the settings for Sub-Instruments are, and the Instrument
table.
GE
The Sub-Instrument will sound simultaneously.
cyrt
Pu H
The Sub-Instrument will be muted while the main Instrument sounds.
in
The P-55 is set to use Instrument Table 2.
15