Settings; Midi Input And Output Destinations - Roland Edirol PCR-30 Owner's Manual

Settings

MIDI input and output destinations

Windows XP/2000/Me users
1
Open Control Panel.
Click the Windows Start button, and from the menu that appears, select
Settings | Control Panel.
Windows XP
Click the Windows start button, and from the menu that appears, select
Control Panel.
2
Open the Sounds and Audio Devices Properties dialog box (or in
Windows 2000/Me, Sounds and Multimedia Properties).
Windows XP
In "Pick a category", click "Sound, Speech, and Audio Devices".
Next, in "or pick a Control Panel icon", click the sounds and Audio
Devices icon.
Windows 2000/Me
In Control Panel, double-click the Sounds and Multimedia icon to open
the "Sounds and Multimedia Properties" dialog box.
3
Click the Audio tab.
fig.2-28_30
4
For MIDI music playback, click the
located at the right of [Default device]
(or in Windows 2000/Me, [Preferred
device]), and select the MIDI device from
the list that appears.
If you want to use Media Player to play
a sound module connected to the PCR's
MIDI OUT connector, select EDIROL PCR
MIDI OUT.
5
Close the Sounds and Audio Devices Properties dialog box.
Click OK to complete the settings.
Installing & Setting Up the Driver (Windows)
Depending on how your
system is set up, the
Sounds and Audio
Devices icon may be
displayed directly in the
Control Panel (the Classic
display). In this case,
double-click the Sounds
and Audio Devices icon.
Select the appropriate
MIDI device for your
system. You do not
necessarily have to select
EDIROL PCR MIDI OUT.
For details on port, refer
to ."About the ports
when using a USB
connection" (p. 159)
.
23