Basic Operation; How To Switch Modes - Roland Edirol PCR-30 Owner's Manual

Basic operation

How to switch modes

You can switch modes at any time, as shown below.
Mode
PLAY mode
(p. 117)
MIDI Channel mode
(MIDI CH)
(p. 118)
Program Change
mode
(PROGRAM
CHANGE)
(p. 119)
Bank mode
(BANK)
(p. 120)
Memory mode
(MEMORY)
(p. 121)
Snapshot mode
(SNAPSHOT)
(p. 122)
Panic mode
(PANIC)
(p. 123)
Edit mode
(EDIT)
(p. 125)
You are returned to Play mode once a setting or a process has been completed within the other
modes. If you want to return to Play mode without completing a setting or operation, press the
button for the current mode (i.e., the button that is lit). Alternatively, press the [CANCEL] button.
The setting you were in the process of making will be discarded.
116
Switcing modes
When you turn on the power, the PCR-30/50/80
will start up in PLAY mode.
Press the [MIDI CH] button.
Press the [PROGRAM
CHANGE] button.
Simultaneously press the
[PROGRAM CHANGE]
button and [MIDI CH]
button.
Press the [MEMORY]
button.
Simultaneously press the
[MEMORY] button and the
[MIDI CH] button.
Simultaneously press the
[PROGRAM CHANGE]
button and the [EDIT]
button.
Press the [EDIT] button.
Explanation
Transmit MIDI messages by
playing the keyboard or
operating the controllers.
Set the transmit channel
(current channel) for the
keyboard and bender lever.
Transmit program change
messages on the current
channel.
Transmit bank select
messages (MSB, LSB) on the
current channel.
Recall a memory set from
internal memory into the
current memory (p. 136).
Transmit the current values
of all controllers ([R1--R8],
[S1--S8]) at once.
Stop "stuck" notes or other
problems with the sound on a
connected MIDI sound
module.
Assign MIDI messages to the
controllers, transmit/receive
bulk data, or make system
settings.