Roland Edirol PCR-30 Owner's Manual page 134

Edit mode (EDIT)
Advanced mode 2
Advanced mode 2 simulates the operation of a conventional rotary encoder. If this is assigned to a
controller, moving that controller toward the right (upward) of center will have the same effect as
turning the encoder clockwise, and moving the controller toward the left (downward) of center will
have the same effect as turning the encoder counterclockwise. As the controller is moved further away
from the center, the result will be the same as if the rotary encoder were moved more quickly.
You can assign advanced mode 2 to a button, but it will not function.
1. Press the [EDIT] button.
2. Slightly move the controller to which you want to assign a Control Change message.
The display will indicate the number of the selected controller.
3. Confirm what's indicated, and press the [ENTER] button.
4. Press the [CONTROL CHANGE] key and then press key [2].
The display will indicate "CC2".
5. Press the [ENTER] button.
6. Input the channel.
7. Press the [ENTER] button.
8. Input the control change number. Use the [DEC][INC] buttons or the [0]–[F] keys to
specify the control change number.
9. Press the [ENTER] button.
10. The display will indicate "P--".
11. Specify the output port. ( "Specifying the port" (p. 159))
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or
134
mode of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently
set value, or will blink if the value is different.
*1 Reference