Roland Edirol PCR-30 Owner's Manual page 152

Edit mode (EDIT)
About the display in Bulk mode
fig.bulk-dis
1st digit:
indicates Receive mode or
Transmit mode
6
Transmit bulk data from your sequencer or other device.
Specify "PCR" (Mac OS 9/8: PCR 1) as the MIDI output device for your sequencer software.
For details on this setting, refer to the manual of your sequencer software.
For details on the port that will be used to transfer bulk data, refer to "About the ports
when using a USB connection" (p. 159).
fig.end
7
When the PCR finishes receiving the bulk data, the display will
indicate "END".
Error display
fig.err
If the data could not be received correctly, the display will blink "ERR".
If this occurs, press the [CANCEL] button to cancel the "ERR" display.
Once "ERR" has been dismissed, perform the bulk reception procedure over again, from step 1.
8
Confirm what's indicated and press the [ENTER] button.
152
Receive
SINGLE
BULK
Transmit
ALL
BULK
2nd digit:
Single Bulk or All Bulk
Waiting to receive
(blinking)
Waiting to transmit
Transmitting/Receiving/Waiting states
(blinking)
Transmitting
3rd digit: indicates
receiving
transmitting