Installing & Setting Up The Driver (Windows); Driver Installation; Windows Xp Users - Roland Edirol PCR-30 Owner's Manual

Installing & Setting Up the
Driver (Windows)

Driver Installation

The installation procedure will differ depending on your system.
Please proceed to one of the following sections, depending on the system you use.
• Windows XP users ............................................... (p. 14)
• Windows 2000 users ............................................ (p. 18)
• Windows Me/98 users ........................................ (p. 21)

Windows XP users

1
With the PCR-30/50/80 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse
(if used).
2
Open the System Properties dialog box.
1. Click the Windows Start menu, and from the menu, select Control
Panel.
2. In "Pick a category", click "Performance and Maintenance".
3. In "or pick a Control Panel icon", click the System icon.
fig.2-1
3
Click the Hardware tab, and then
click [Driver Signing].
Open the Driver Signing Options
dialog box.
4
Make sure that "What action do
you want Windows to take?"
is set to "Ignore".
If it is set to "Ignore", simply
click [OK].
If it is not set to "Ignore", make
a note of the current setting
("Warn" or "Block"). Then change
the setting to "Ignore" and
click [OK].
14
If you are using Windows
XP Professional, you must
log on using a user name
with an administrative
account type (e.g.,
Administrator). For details
on user accounts, please
consult the system
administrator of your
computer.
Depending on how your
system is set up, the
System icon may be
displayed directly in the
Control Panel (the Classic
display). In this case,
double-click the System
icon.
If you changed "What
action do you want
Windows to take?" in
step 4, you must restore
the previous setting after
you have installed the
driver.