Show Logging Onboard - Cisco Nexus 3548 Command Reference Manual

show logging onboard

show logging onboard
To display the onboard logging information based on the error type, use the show logging onboard
command.
Syntax Description bcm_used
boot-uptime
device-version
endtime
environmental-history Displays the OBFL environmental history.
exception-log
kernel-trace
obfl-history
obfl-logs
stack-trace
starttime
status
trident
> file
| type
Command Default None
Command Modes EXEC mode
Command History Release
5.0(3)A1(1)
Usage Guidelines The date and time arguments for the starttime and endtime keywords are entered as the date
month/day/year (mm/dd/yy), followed by a hyphen, and the time in 24-hour format in
hours:minutes:seconds (HH:MM:SS). For example:
•
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
148
show logging onboard {bcm_used | boot-uptime | device-version | endtime |
environmental-history | exception-log | kernel-trace | obfl-history | obfl-logs | stack-trace |
starttime | status | trident} [> file | | type]
Displays the onboard failure logging (OBFL) BCM usage information.
Displays the OBFL boot and uptime information.
Displays the OBFL device version information.
Displays the OBFL logs until the specified end time in the following format:
mm/dd/yy-HH:MM:SS
Displays the OBFL exception log.
Displays the OBFL kernel trace information.
Displays the OBFL history information.
Displays the OBFL technical support log information.
Displays the OBFL kernel stack trace information.
Displays the OBFL logs from the specified start time in the following
format: mm/dd/yy-HH:MM:SS
Displays the OBFL status enable or disable.
Displays the OBFL Trident information.
(Optional) Redirects the output to a file. See the "Usage Guidelines" section
for additional information.
(Optional) Filters the output. See the "Usage Guidelines" section for
additional information.
Modification
This command was introduced.
starttime 03/17/08-15:01:57
System Management Commands
OL-27851-02