Cisco Nexus 3548 Command Reference Manual page 170

show monitor session
This example shows how to display the information about an ERSPAN session on a switch that runs
Cisco NX-OS Release 5.0(3)U2(2):
switch# show monitor session 1
session 1
---------------
description
type
state
vrf-name
destination-ip
ip-ttl
ip-dscp
mtu
origin-ip
source intf
source VLANs
switch#
Related Commands Command
monitor session
show running-config
monitor
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
160
: ERSPAN source session
: erspan-source
: down (No valid global IP Address)
: default
: 192.0.2.1
: 5
: 3
: 1000
: origin-ip not specified
:
rx : Eth1/5
tx : Eth1/5
both : Eth1/5
:
rx :
Description
Displays the contents of the startup configuration file.
Displays the running configuration information for SPAN and ERSPAN
sessions.
System Management Commands
OL-27851-02